- Goods for repair BARTOLINE
- Goods for repair PUFAS
- WALLPAPER
- BUY TODAY
- SALE
- PHOTOMURALS ERMA
- DIGITAL PRINTING DIMEX
- Polystyrene products HOMESTAR
- Polystyrene products СIМ'Я
- Polyurethane products EUROPLAST
- CURTAIN HOLDERS & RODS
- ROLLER BLINDS
- Goods for repair ERMA
- Construction tanks, garden goods GREENLIFE
- Linoleum FATRA
- DECORATIVE INTERIOR PANELS PVC
- Decorative slatted panels MARBET DESIGN
- Home textiles with individual design
-
HEAT INSULATION
- INSOLA POLYNOR
- Builder tools
- BIOLAR
5 x 0.5 m x 4 mm
2.5 m2
heat reflective aluminum foil
Covering cracks
Temperature resistance: 75 ° C
Free of solvents and CFCs, environmentally friendly
Gross density: 14 kg / m3
Adhesive consumption: approx. 250-500 g / m²
Areas of application:
Cold insulation and reflection of the heat given off by the radiator by up to 95% into the living space
Reduction of heat loss by up to 15% (in relation to an uninsulated, 24 cm thick brick masonry)
rapid heating of the rooms
individually cut to size
easy and quick attachment with the styrofoam adhesive
2.5 m2
heat reflective aluminum foil
Covering cracks
Temperature resistance: 75 ° C
Free of solvents and CFCs, environmentally friendly
Gross density: 14 kg / m3
Adhesive consumption: approx. 250-500 g / m²
Areas of application:
Cold insulation and reflection of the heat given off by the radiator by up to 95% into the living space
Reduction of heat loss by up to 15% (in relation to an uninsulated, 24 cm thick brick masonry)
rapid heating of the rooms
individually cut to size
easy and quick attachment with the styrofoam adhesive
Assembly:
Make sure the surface is clean, dry, stable and smooth and measure your wall. Cut the wallpaper to the desired length and apply the styrofoam adhesive to the full surface of each strip with a spatula on the back of the wallpaper (not on the aluminum layer). Then glue the insulating wallpaper edge to edge behind the radiator and press it down with a rubber roller. Remove any glue residue with a wet cloth. After 48 hours you can use the wallpaper you want according to the manufacturer's instructions.
Make sure the surface is clean, dry, stable and smooth and measure your wall. Cut the wallpaper to the desired length and apply the styrofoam adhesive to the full surface of each strip with a spatula on the back of the wallpaper (not on the aluminum layer). Then glue the insulating wallpaper edge to edge behind the radiator and press it down with a rubber roller. Remove any glue residue with a wet cloth. After 48 hours you can use the wallpaper you want according to the manufacturer's instructions.
-
8.29€
7 Available
 |  | ezerzeme@apollo.lv | > Noteikumi un nosacījumi > Noformēšana > Norēķinu veidi > Delivery | > Privātuma politika > Contacts > Derīgie padomi remontam > WHOLESALE |
Copyright © KU-Zilā Ezerzeme, 2006-2023