Restoration agents

Art.-Nr. 145
Mould Remover
- Spray For the quick, thorough and visible removal of mould, moss and algae on all mineral surfaces.
- contains chlorine
- immediate results
- propellant-free
- Use biocides safely. Always read the label and product information before use

Art.-Nr. 142-R
STOP Algae, Moss and Fungus Chlorine free
- odourless
- independently removes mould, algen and moss indoors
- e.g. in sanitary installations
- cleans house walls, fl oors, roofs, garages, fences, tiles, clay tiles, stone, concrete, etc.
- also suitable as a cleaning surface treatment for the following coats and façade impregnations
- ready for use
- handy spraying bottle
- Use biocides safely. Always read the label and product information before use

Art.-Nr. 142
Concentrated Solution
- dilutable with water 1:10
- very easy to use and apply using the hydraulic spraying device
- Use biocides safely. Always read the label and product information before use

Art.-Nr. 146
Fungicidal Paint Additive Concentrated solution with long-term effect against mould, algae and moss attack. Protects water-based products such as emulsion paints and -adhesives, wallpaper paste and glue from mould and bacteria.
- for indoors and outdoors
- suitable also as a primer
- Use biocides safely. Always read the label and product information before use

Art.-Nr. 37 White grout filler for wall and floor tiles and mosaic surfaces.
- resin-reinforced
- waterproof
- produces smooth surfaces
- hardens without cracking
- for joints of up to 5 mm

Art.-Nr. 375
Joint Repair white High-quality special joint fi ller for jointing wall tiles. Ideal for the quick repair of damaged tile joints.
- ready for use
- hardens crack-free
- waterproof
- for kitchen and bathroom
- practical, re-closable stand tube
- 3 different colors: white, grey, beige

Art.-Nr. 39
Fresh Grout To replace and freshen-up tile joints on walls.
- white covering power
- abrasion- and wash-proof
- mould- and lightproof
- can be colored with up to max. 5 % tinting paints or concentrated colorants
- Set supplied with 250 ml Fresh Grout, 1 sponge and 1 brush

Art.-Nr. 377

Art.-Nr. 378

Art.-Nr. 342

Art.-Nr. 034801000

ideal for sanitary and damp spaces
fungistatic – with long-term film protection against mould infection
for up to 25 mm joint widths
permanently elastic
UV-stable
ageing-resistant
25 % expansibility
for indoor and outdoor use
CE-compliant to EN 15651-1/F-EXT-INT-CC, EN 15651-3/S1
colours: transparent, white

Art.-Nr. 150

Antifungal silicone sealant with film retention – prevents the formation of mold and fungus on the sealant. After hardening, flexible and temperature resistant from -40 to +150 ° C. Ageing and UV resistant. Not paintable.
For joint sealing, gap filling and corner joints up to 25mm. Ideal for ceramic tiles, glass, enamel, painted and glazed surfaces PVC, stainless steel, aluminum and similar surfaces.

Art.Nr. 330

Art.Nr. 3401-R

An air dispersion mass for filling and adjusting decorative styrofoam elements, including pufatherm insulating boards indoors. It is also suitable for mineral substrates and gypsum boards.

- white
- layer thickness up to 3 cm
- does not crack and does not shrink
- retains elasticity
- can be painted
- without solvents
- prevents heat leakage
- storage and transportation are also possible at a minus rate. up to -15 ° C

Art.-Nr. 6
Alkaline/Leaching Agent
- Liquid Concentrated Solution Removes tough and greasy stains. Produces clean surfaces for easier varnishing and improved adhesion. Concentrated solution for 3-5 l water.
- highly effective
- increases adhesion for new coats

Art.-Nr. 7
Alkaline/Leaching agent - SC super clean Highly soluble leaching powder for the removal of tough and greasy stains.
- produces clean surfaces for easier varnishing and improved adhesion
- increases adhesion for new coats
- 100 g bags supplied in attractive display box

Art.-Nr. 8
Insulating Salt Powder pretreatment to neutralize fresh cementand limeplaster and to block water and smoke stains.
- highly soluble
- for indoors and outdoors
- 100 g bags supplied in attractive display box

Art.-Nr. 111-R
Salpetre Remover Easily removes efflorescence from plaster, concrete, brick, clinker and natural stone.
- ready for use
- highly effective, penetrates deeply
- simple and easy to use

Art.-Nr. 112-R
Cement Film Remover Easily removes lime- and cement fi lm (laitance) from acidproof tiles, clinker, terrace paving stones etc. Also for the removal of lime scale and boiler scale.
- highly effective
- cleans visibly and thoroughly